DNV Leak 3.3

Description

DNV Leak is a powerful and simple software for investigating fluid leakage by frequency analysis method. This method uses the opening and closing of an oscillating valve at the bottom of the pipe and analyzing the frequency responses of the system in a specified range and examining the changes before and after the leak can determine the exact location of the leak. This method also considers friction in pipes and is therefore one of the most accurate methods in this field. This method detects leaks in the range of 0.5 discharge and above. Various software has been provided to perform calculations related to this method, and DNV Leak is one of the suitable programs in this regard. This program is organized and with a systematic approach is able to detect leakage currents of various equipment and devices, in addition to these is also able to verify and evaluate the results.

The organized approach of this program means that you are able to perform all kinds of analyzes automatically and with the guidance of the program, which saves a lot of time compared to the manual method. This product can be used to detect leaks from a variety of devices such as pipes, valves, pumps and related equipment, and in fact any type of pipe and duct. DNV Leak notifies you of potential leakage hazards through frequency analysis through its own methods and algorithms, thereby preventing potential hazards before they occur. This product has a complete database of leakage currents such as UK HSE and HCRD, which can be used for all types of piping systems and their connection equipment.

System requirements DNV Leak

Supported Operating Systems: Windows Vista / Seven

Installation

First, install the software by running the setup.exe file from the DNV Leak 3.3 \ install \ Leak_Installation path. Then right-click on the LEAK_3_3_0_7 folder in the program installation path and select Properties. Go to the Security tab and click Edit. Now select your username in the first slider and in the bottom slider, click Full control and click OK. Then go to the General tab and uncheck Read-only and click OK.

Now copy the Patcher file in the patch folder to the default path \ DNVS \ LEAK_3_3_0_7 \ bin and run it as Run as administrator and click on Patch. The message of crack success must be displayed.

This version was installed on 13 June 1997 in 64-bit Windows 10 and was successfully activated.