PassMark MemTest86 Pro 9.0

Description

MemTest86 is a bootable software for testing memory (RAM) on x86 systems. A bad RAM always causes a lot of problems. For example, if you are dealing with an unstable system, you should doubt the health of Rome. If you see a lot of blue screen errors, it should still be one of the suspicious options for RAM failure. In general, when the device memory is forgotten! The overall functioning of the system is impaired. The point is that the problems of RAM are not always so colorful, and sometimes a RAM that is slightly damaged will cause other components to wear out over time.

This program performs 13 different types of tests on memory, examines all the desired parameters and angles, and reports the smallest problems and defects in memory. Complete testing of RAM is possible only if the memory is not occupied by the operating system, so this program is made as a bootable and to use it, you must put it on a flash memory or CD and boot the system. We recommend this program to hardware specialists and professional repairmen who specialize in this field, because the results of the study of this program are of little use to beginners.

Features

Perform 13 different types of tests to diagnose all problems and defects in Rome

Support for the new generation of DDR4 technology for RAM

High speed in performing tests

ECC Ram support to correct existing errors

Graphical environment with mouse support and the possibility of storing results on the hard disk

Supports English, German, Chinese and

No need to install the operating system to work with the program

Ability to boot via network (pxe)

Ability to boot in both BIOS and UEFI modes

And

System requirements

UEFI or BIOS platform firmware Windows, Linux, or Mac OS CD or USB Flash Drive (>= 256MB capacity)

Installation

Listed in the Readme file.