Schlumberger OLGA 2018.1 x64

Description

Schlumberger OLGA is software for modeling and simulating multiphase flow, which is a dynamic process. The program was first formally offered by Statoil, which was later acquired by the SPT Group, and after its acquisition by the large Schlumberger company, its development was entrusted to Schlumberger or Schlumberger. In Olga software, various types of pipeline networks, which include various process equipment such as compressors, valves, heat exchangers, pumps, etc., can be modeled and simulated dynamically.

Features and specifications of Schlumberger OLGA software

- Accurate and advanced simulation and modeling of flow inside pipes

- Ability to simulate the dynamics of oil and gas pipes in different conditions

- Ability to calculate and import various components such as heat transfer between the pipeline wall and the environment, pipe branching, pipe corrosion and

- Performing calculations and analysis in steady-state to investigate the problems and challenges of the flow

- Time-dependent or transient flow simulation to maximize production potential

Possibility of environmental impact assessment

- Ability to simulate and accurately predict the main and key conditions of operations such as startup, shutdown, Pigging operation and

System requirements

Hardware and software requirements for this version have not been made available to the public by the manufacturer, but research has shown that the work requires moderate to high processing power.

Photos

Installation

Versions 2017 and 2018

In the Readme file in the Crack folder.

2015 and 2016 versions:

Listed in the Readme.txt file in the Crack folder.

Version 2016.2.1 was installed and successfully activated on 13 August 1996 in 64-bit Windows 10.

Version 7:

Run the Setup_wannacrack.com.exe file to start installing the license management tool and select the Use a demo- or nodelocked license option during installation. After the SPT License Handler window appears, click Configure and import the OLGA_wannacrack.com.lic file from the Crack folder. Click Close to begin installing the software; After the installation is complete, copy and replace the contents of the SPT Group folder in the Crack folder in the program installation location. Finally, copy the OLGA_wannacrack.com.lic file to the root of drive C and run the software. If needed, create a folder called FlexLM on drive C, copy the OLGA_wannacrack.com.lic file to it, and rename it to license.dat.